Root 2 GT-N7100 Galaxy Note on Android 4.1.2 Jelly Bean XXDME1 with CF ... - IBTimes.co.uk

The Android 4.1.2 Jelly Bean XXDME1 official update was recently rolled out for the international version of Samsung Galaxy Note 2 with model number N7100. Users can install the update through OTA as well as via Samsung Kies. Also, users can update from firmware supported regions Their devices with the latest official build using Odin flashing tool.

XXDME1 Jelly Bean Android 4.1.2 official update is available for Galaxy Note N7100 2.

Those who have already installed the Android 4.1.2 Jelly Bean XXDME1 On Their devices and are currently looking for root method May follow our step-by-step guide. The tutorial uses CF-Auto-Root file by XDA Recognized Developer, Chainfire. Head over to the source page to learn more about the root package.

IBTimes UK That reminds its readers it will not be held responsible for any damage to the device. Users are advised to ensurethat usefull Their phones following measurement requirements.

Pre-requisites

• FOLLOW IBTimes
• 

1) Install USB drive r for Samsung Galaxy Note 2 to transfer files between the Android device and computer.

2) Enable USB Debugging Mode on the phone to connect the Android device with the computer and use the Android SDK with it. [Press Menu >> Settings >> Applications. From there navigate and click on option and Development Ensure the USB Debugging Mode is turned on.]

3) As the tutorial might wipe out all data of the phone, create a backup. If the device is having any custom recoveries zoals CWM / TWRP already installed then backup the data using the recovery.

4) The phone shouldhave above 80 per cent of battery charge.

5) The Galaxy Note shouldering be factory unlocked.

6) The device will lose manufacturer’s warranty once it is rooted. But users can claim the warranty back by unrooting the device later.

7) The CF-Auto-Root file only works on the Samsung Galaxy Note N7100 2. Axis flashing this on an incorrect version might brick the device, verifydata the model number of the two discs by selecting Settings >> About device Model number >> .

Steps to Root Samsung Galaxy Note N7100 2 on Android 4.1.2 Jelly Bean XXDME1

Step 1: Download Auto CF-Root for Samsung Galaxy Note 2 to the computer

[File name: Auto CF-Root-to3g-to3gxx-gtn7100.zip ]

Step 2: Extract the downloaded CF-Root-Car to get a zip file with tar.md5 extension

.

Step 3: Download Odin3 v3.07 . Extract the zip to get Odin3 v3.07.exe alongwith few other files

Step 4: Power off the Galaxy Note 2. Wait for five to six seconds for vibration to confirm complete switch off

Step 5: Boot the phone into Download Mode by pressing and holding Volume Down + Home buttons together and then press the Power button until the device turns on. Now press the Volume Up button to enter Download Mode

Step 5: Run Odin on the computer as an Administrator

Step 6: Connect the Note to the computer using USB cable while it is in the Download Mode. Wait until Odin Detects the device. When the phone has successfully connected, the ID: COM box in Odin will turn yellow with the Com port number. Also, the connection will be successful Indicated by a message saying Added in Odin.

Added

If the message does not Appear, then try the USB port located at the back of the computer. If that too does not work, then re-install USB Driver

Step 7: In Odin, click the PDA button and select the CF-Root-to3g Auto-to3gxx gtn7100.tar.md5-file

Step 8: Verify That the Auto Reboot and F.Reset Time checkboxes are selected in Odin. But the uncheck Re-Partition option

Step 9: Double check everything and click the Start button in Odin. The installation shouldering beginning now and would take few minutes to complete

Step 10: Upon the completion of the installation process, a PASS message with green background will Appear in the left-most box at the top of Odin. The phone will then restart automatically. Once the home screen appears on the phone, safely unplug the USB cable from the device to disconnect it from the computer

Samsung Galaxy Note 2 shouldering be now successfully rooted on Android 4.1.2 XXDME1 Jelly Bean. Users That May now install any app requires root permission. Additionally, to Ensure the Root method is installed and working properly, verify flag with the Root Checker app from Google Play Store.

[Source: Honai or Android]

To report problems or to leave feedback about this article, e-mail:
To contact the editor, e-mail:

This article is copyrighted by IBTimes.co.uk, the business news leader