Update Galaxy Note N7100 2 to XXDME1 Android 4.1.2 Jelly Bean Official ... - WCCFtech (blog)

Samsung has now rolled out another firmware update for Galaxy Note N7100 2; build N7100XXDME1 Android 4.1.2 Jelly Bean Official Firmware for users. The said firmware upgrade brings the latest Android Rom 2 N7100 Galaxy Note to users across the world.

While this update is available via SELECT and it is recommended That You get it from there. If for some reason, you can not access the official update or would not like to wait and get it on your phone right now, here is a guide to update your Galaxy Note N7100 2 to XXDME1 Android 4.1.2 Jelly Bean Official Firmware.

Also, read: Guide to Root XXDME1 Android 4.1.2 Jelly Bean on Galaxy Note N7100 2

Disclaimer: This guide will be using ‘Odin’ as a firing to flash the official firmware on your Galaxy Note N7100 2. During the process, you might lose all your Replace existing installed apps and personal settings. Therefore it is Necessary for you to follow the guide carefully. Also, please, do mind thatthis tutorial is only for Galaxy Note N7100 2. Do not try this guide in any other Android device.

XXDME1 Android 4.2.1 Firmware Details:

PDA: N7100XXDME1
CSC: N7100OLBDMD2
Version: 4.1.2
Date: 2013-02-19
Regions: Austria, Belgium, France, Germany, Hungary, Italy, Spain, United Kingdom

Download

1. Android 4.2.1 Jelly Bean N7100XXDME1 for Galaxy Note N7100 2
2. Odin 3:07

Update Galaxy Note N7100 2 to XXDME1 Android 4.1.2 Jelly Bean Official Firmware

1. Download and Extract N7100XXDME1_N7100OLBDMD2_XSE.zip to get a file with. tar extension in the unzipped folder.
2. You will then extract Odin zip file to get Odin3 v3.07.exe.
3. Switch your phone off. Surethat and make you wait 5-6 seconds to confirm the complete power down cycle.
4. You will then put your Galaxy Note 2 N7100 phone in Download Mode by pressing and holding down the Volume Down button, alongside the Home and Power button, until the screen flashes the Samsung Logo. After a few seconds of that, the phone will enter download mode.
5. Run Odin3 v3.07.exe with Administrator rights.
6. Connect your Galaxy Note 2 N7100 with your PC. You will then see a notification Appear in Odin in the bottom left saying “Added!”. If for some reason, you do not see the said notification, try another USB port. If that too does not work, then reinstall the USB driver. Once you successfully see the “Added!” Notification in Odin, you are good to go. Also, check for COM port being depicted by a number in ‘yellow’ to make surethat you have successfully added your device.
7. Select the following files in Odin at their Respective tabs from extracted XXDME1 firmware folder:
   • Click the “PDA” Button, and select the. tar file extracted in Step 1.
   • Click the ‘Phone’ Button, and select file with * modem * in its name (Ignore, if this file does not exist file).
   • Click the ‘CSC’ Button, and select file with * csc * in its name (Ignore, if this file does not exist file).
   • Click the ‘PIT’ Button, and select the. zip file. Use only if you got it while extracting in step 1 above, otherwise ignore it.
   • Odin window, make sure Auto Reboot and F. Reset Time check boxes are selected. Please make surethat Re-Partition checkbox is selected, only if you are using a. Zip file.
8. Hit the “START” button to start the flashing process.
   Once the flashing process is completed, the phone will automatically reboot and you will see a ‘Green’ PASS notification in the top-left-most box. You can unplug the device from the computer now.

If you have followed every point described in the guide, your Galaxy Note N7100 2 shouldering now be running Android 4.2.1 Jelly Bean build N7100XXDME1. If there are any issues, feel free to post in the comments section for our staff to take a look at it.